Good Results at North Island champs
Nathaniel sailed the 3D Printed IOM D6 sail number 83 into 8th Place a I sailed the Glass D7 Sail number 84 into 9th Place . This was a top class fleet made up mostly of the V11 design. We had several top end placings with Nathaniel winning Heat 11 . Conditions were light to …
D7 had some good results in Auckland
Sailed in the Commodores cup and again too many contacts however a few first and second places was encouraging
D6 IOM Glass Kit set 3D printed Parts
Above are the 3D Printed parts that insert into a glass D6 IOM hull or even it is possible to use with a wooden hull . Saves a lot of time with construction
I sailed IOM D7 84 in the Auckland champs
Too many collisions so not very good results at the end of the day First day was very light with wind from all directions Second day it got up to B rig conditions and good sailing. I spent a lot of time changing rigs and it may have been better to stay with one and …
D6 Kitset is on Trade Me now
You may get a better price through Trade Me with keel Trade Me without keel D6 Kitset 7 IOM Radio Yacht 3D Printed IOM D6 completed kit set Parts are carefully packed
New D7
The D7 is a modification of the D4. This has been developed because of a lot of interest in with the D4 bow shape. We found the D6 to be a faster boat so we have incorporated these features into the D7
Glass Hull kitset with 3D deck is now available
With the glass hull kitset we have managed to incorporate the 3D printed cockpit layout with center case, mainsheet post and rudder shaft. Assembly is relatively easy with pre drilled alignment holes for tempory screwing together while glue is curing.